Aira Valves

The industrial valve MANUFACTURER

Ball Valve Actuator

What is a ball valve?

Ball valves are rotational or quarter-turn valves. Their closing film is an exhausting pivoting ball that is upheld on one or both top and base finishes. At the point when the valve is open, the drag in the ball is lined up with the progression of the pipeline, allowing the substance to go through. When shut (by turning the stem 90 degrees), the drag becomes opposite to the stream and stops it. These ball valves can have strong or metal seats, are normally bi-directional, and come in various association designs. The most well-known ball valve arrangement is flanged and strung.

Ball Valve Design

Traditional ball valves are planned principally for liquid segregation as they have unfortunate control attributes. The seat and body of a ball valve can be effectively dissolved on the off chance that the valve isn't completely shut or opened. Ball valves can likewise be intended for stream control. When intended for control they have a unique component in the plan of the drag of the closing layer. This bore is formed as a "V" and with this plan, they are designated "V-port" ball valves.

This plan takes into account linear and, surprisingly, equivalent rate stream qualities. At the point when the valve is in the shut position and opening begins, the little finish of the "V" opens initially allowing stable stream control during this stage. This plan is made of vigorous development to deal with higher liquid speeds which could ordinarily harm a standard valve. At the point when appropriately machined, the V-port ball valve can be utilized as a control valve, offering a tight shutoff.



Aira Euro Automation is the leading ball valve supplier in Nigeria. We offer various types of industrial valves like ball valves, butterfly valves, control valves, pressure reducing valves, and many more.

Ball Valve Applications

Ball valves are generally utilized in numerous industrial cycle applications. Regular ball valves are generally utilized for liquid detachment while quick operating times and tight shut-off are important or basic. They can likewise be utilized as "full port" without limitations when required. The ball valve is normally utilized in the oil and gas industry and is tracked down in numerous areas of manufacturing, synthetic capacity, and, surprisingly, private purposes.

Ball Valve Advantage

  • In little sizes, they can be conservative and low-maintenance.

  • Savvy contrasted with different sorts of valves.

  • Seat configuration gives magnificent sealing ability.

  • They open and close rapidly, ideal as crisis shut down valves (ESD)

  • Ball valves have the plan adaptability that takes into account numerous pathways, multiport valves

Ball Valve Disadvantage

  • Regular ball valves are not reasonable for stream control since throttling can make the seat of a ball valve dissolve rapidly.

  • For slurry applications or liquids with a high level of solids, particles slam into the ball valve surface and can stick to them. This can cause spillage, scraped spots, and different issues.

  • In enormous sizes, they have a perplexing plan, and maintenance can time-consume.

Go Back


Blog Search


There are currently no blog comments.